Production files
From quoteto cut file.
- Formats
- DXF · SVG · EPS · AI
- Scale
- 1:1 in millimetres
- Holes
- Mounting holes drilled
Tested in
- Drawing
- Open late
- Sign type
- LED neon
- Scale
- 1:1
- Units
- mm
Real size
The size they pay foris the size you cut.
Your customer
900 mm
Designs it and sees the price
Your customer types Open late, picks 900 mm wide and sees the price for that size.
Your order
900 mm
Arrives with its files
The order or quote keeps the size the customer paid for, every option they chose and the files you turn on.
Your maker
900 mm
Opens it at 1:1
Your maker opens the DXF in LightBurn, QCAD or Fusion, and it measures 900 mm.
By sign type
A cut file forevery sign type you cut.
- Outline in the DXF
- Mounting hole
- Neon tube centre line
LED neon
- Backboard outline
- Letter outline
- Raceway rail layout
- Tube centre line · Experimental
The backboard to cut, with mounting holes drilled where the preview shows them, and the letters as a 1:1 layout template.
Metal cut-out panels
- Panel outline
Sized and priced as the physical panel, with its mounting holes drilled. Cut-out letters stay separate.
These drawings are simplified. The sample files below are real output.
Mounting holes
The holes on the designare drilled in the DXF.
A drawing of a neon backboard three times: in the preview with a standoff at each corner, in the DXF with a 10 mm hole where each standoff sat, and one corner enlarged, its hole centre 20 mm in from both edges.
| Mounting | Hole in the DXF | |
|---|---|---|
| ScrewsA wall screw through the board. | Ø 5 mm | A wall screw through the board. |
| StandoffsThe stud of a 19 mm standoff. | Ø 10 mm | The stud of a 19 mm standoff. |
| Hanging kitOne hole for each cable loop. | Ø 5 mm | One hole for each cable loop. |
| Key ringA split ring. | Ø 5 mm | A split ring. |
- Position
- Where the preview shows themThe holes follow the real outline of the backboard or panel your customer saw.
- Size
- 5 mm or 10 mm, for the mountingThe hole is the size of the hardware, whatever the size of the sign.
- Edge distance
- At least 1.5 hole diametersFrom the hole's centre to the cut edge.
- Letters
- Kept clearEach hole leaves room for its screw head or standoff cap beside the letters.
- LED neon
- Board, Cut to Shape, Cut To Letter, Custom Shape and BoxCut To Letter where the band has room. A Box front panel gets its four standoff holes.
- Metal
- Metal cut-out panelsCut with the panel, in the same DXF.
Specs and sample files
Open one inyour own software.
- DXF version
- AutoCAD R12
- Units
- Millimetres
- Scale
- 1:1The size your customer paid for, measured from the drawn letters.
- Outlines
- WeldedOverlapping letters are usually welded into one outline.
- Mounting holes
- Drilled in the fileOn neon backboards and metal cut-out panels, at 5 mm or 10 mm for the mounting.
- Tested in
- LightBurn, QCAD and Autodesk Fusion
- Artwork
- SVG, EPS and AI at real sizeThe AI file is an Illustrator-compatible PDF with an .ai name.
LightBurn and its logo are trademarks of LightBurn Software. QCAD and its icon are by RibbonSoft GmbH; the icon is used under CC BY 3.0. Autodesk, Fusion are trademarks of the Autodesk group of companies. Sign Customiser is not affiliated with Autodesk, LightBurn Software or RibbonSoft.
Letter outline
open-late-900mm-letter-outline-v1.dxf
The neon letter outlines at real size, as a 1:1 layout template.
- DXF R12
- Millimetres
- 1:1 template
- 103 KB
Tube centre line
open-late-900mm-centre-line-v1.dxf
The single path each neon tube follows, for the CNC router. Experimental.
- DXF R12
- Millimetres
- 10 paths
- 13 KB
Experimental · LED neon
One linefor the CNC router.
- Path
- Each tube's line
- Curves
- True arcs, in mm
- Corners
- Kept as points
- Where
- Order's product page
Handoff
Every file landswhere your maker looks.
Example Manufacturer Email for order 1042: a 90 cm pink LED neon sign that reads Open late, cut to shape, with links to its SVG, EPS, DXF and AI files.
Every order
Manufacturer Email
A preview of the sign, the options your customer chose and a link to each file you turn on.
- DXF
- SVG
- EPS
- AI
In your admin
The order's product page
Every file under Design Files, including the neon letter outline, rail layout and tube centre line.
- All DXFs
- SVG
- EPS
- AI
Quote Mode
The quote email
A quote request arrives with the design's SVG, so you can price the job and reply.
- SVG
Shopify
The Shopify order
The Shopify order carries the design's SVG as _svg, so it travels with the order.
- _svg
Set up once
Turn on the filesyour maker works from.
- DXF
- Cut files in millimetres that AutoCAD and CNC software open at the sign's real size.
- SVG
- Vector artwork with the letters already traced. Opens in Illustrator, Inkscape and most cutting software.
- EPS
- The same artwork for makers who use older design software or print workflows.
- AI
- The same artwork as an Illustrator-compatible PDF with an .ai filename.
AI design to production
From a logoto a cut file, 24/7.
Your customer uploads a logo
A logo, a photo or a sketch, in your customiser, at any hour.
AI makes a design your shop can make
AI Sign Designer redraws it as clean vector lines and checks it against the rules for the sign type.
Your customer sizes it and sees the price
The design opens in your customiser with a live price for the size they choose.
The order arrives with its files
The SVG and the DXF its sign type offers, plus EPS and AI when you turn them on.
FAQ
Questions aboutproduction files
Which production files does Sign Customiser make?
DXF, SVG, EPS and AI files. The AI file is an Illustrator-compatible PDF with an .ai name. You turn each one on per customiser in Core Setup → Manufacturing files, and every current plan includes them.
Which sign types get a DXF?
Every sign type that is cut: acrylic and metal channel letters, flat-cut letters, metal cut-out panels, aluminium plate, stencil, Braille, wood letters and frames, and LED neon backboards. Neon also gets a letter outline, a Raceway Double rail layout and the experimental tube centre line. A lightbox has no cut outline, so it gets SVG, EPS and AI artwork instead.
Will the DXF open at the right size?
Yes. DXFs are written in millimetres at the size your customer paid for, and our test DXFs opened at 1:1 in LightBurn, QCAD and Fusion. Download the samples on this page to try them in your own software, and check every file before you cut.
Are the mounting holes in the DXF?
Yes. Screw, standoff, hanging and key-ring holes are drilled in the DXF of LED neon backboards (Board, Cut to Shape, Cut To Letter where the band has room, Custom Shape and Box) and metal cut-out panels. They sit where the preview shows them, at 5 mm or 10 mm for the mounting, and clear of the letters.
What is the tube centre-line file?
A single centre-line path for the CNC router: a DXF of the line each neon tube follows through the letters, with true arcs in millimetres and sharp letter corners kept as points. It is experimental. Turn on Tube centre-line (DXF) in Manufacturing files and you find the file on the order's product page, for neon text designs. Tell us how it cuts.
Where does my maker find the files?
The Manufacturer Email links the SVG, EPS, AI and DXF you turn on. Every file, including the neon letter outline, the Raceway Double rail layout and the tube centre line, is on the order's product page under Design Files. Quote Mode quote emails carry the SVG, and the Shopify order carries the SVG as _svg.
Can a design get no DXF?
A design may get no DXF files if its text has an emoji or a character the font can't draw, or vertical text sized by its height.

