Make metal ring signs with Text fields
Set the production artwork, curved lines, fixed or replaceable artwork, mounting holes and manufacturing rules for a metal ring customiser.
Last updated:
Text fields give your customers set lines to complete. On a Metal Cut-Out customiser, Text fields also hold the production artwork that you cut the sign from, for example a ring. The customer types the wording. The customiser fits the wording to the lines that you set.
Use Text fields to sell these signs:
-
A family name ring.
-
A business ring with a logo.
-
A ring with fixed artwork in the centre.
Note: Text fields are not available for all Stores. If Text fields is not in Core Setup, contact us.
Try the demos
-
Metal ring sign: https://demo.signcustomiser.com/products/metal-ring-sign. The ring has two bars. The customer can replace the centre artwork.
-
Oak tree ring sign: https://demo.signcustomiser.com/products/oak-tree-metal-ring-sign. The ring has no bars. The oak tree is fixed. The customer changes only the wording and the font.
Create a metal ring customiser
-
Create a customiser.
-
Select the Metal Ring Signs sign type.
-
Do the steps.
The new customiser has a ring with two curved lines, centre artwork, two mounting holes and preset diameters. Edit the ring on the Text fields page.
Open the Text fields page
-
Open the customiser.
-
In Core Setup, select Text fields. It is below Fonts.
Set the production artwork
The production artwork is the SVG file that you cut the sign from. It sets the frame of the sign, for example a ring with bars or a ring without bars.
-
In Production artwork, select Add file or Replace file.
-
Select an SVG file. The file must have filled shapes in one colour. The maximum size is 512 KB.
-
If the file does not have a size, enter the Artwork width. Then select Import file.
The customiser does not change the file. If the file is not correct, the import stops and shows the reason.
Rings with bars and rings without bars
Bars join the inner ring to the outer ring. If the ring has no bars, only the lettering joins the two rings. Make sure that each line has letters that touch both rings. For these lines, use the Fill the band between two rings letter size.
Add and edit lines
-
In Lines, select Add line. To edit a line, select the line.
-
Enter the Label. The customer sees this name.
-
Enter the Default wording. The sign shows this wording until the customer types their own wording.
-
Enter the Maximum characters.
-
Set the position of the line. On a ring, the line follows a circle around the ring centre.
-
On a curved line, in Letter size, select one of these:
-
Fill the band between two rings: the letters touch both rings.
-
Fill the room the line has: long wording gets smaller letters.
-
-
In Customer choices, select what customers can change: Wording, Font or Colour.
-
Select Save.
You can have a maximum of eight lines and graphic areas. If the wording is long, the letters become narrower or smaller. The letters are never smaller than the Smallest letter height in Letter size.
Add artwork with graphic areas
A graphic area holds artwork, for example a logo or a tree.
-
In Graphic areas, select Add graphic area.
-
Enter the Name and the Description.
-
Set the position and the size of the area.
-
In Area shape, select Rectangle or Circle.
-
Import the artwork. Use an SVG file with filled shapes in one colour.
-
In Customers can, select one of these:
-
Not change the artwork: the artwork is always on the sign. The customer cannot move the artwork, make it smaller or replace it.
-
Replace the artwork: your artwork is a default. The customer can upload their own artwork. You can also let the customer move the artwork and make it smaller.
-
-
Select Save.
The customiser cuts the artwork as it is. It does not add metal to join the artwork to the frame. To make the sign one piece, make sure that the artwork touches the frame. For example, give the artwork a circle that touches the inner ring.
Add mounting holes
-
In Mounting holes, select Add mounting hole.
-
Set the position and the diameter of the hole.
Put the holes on metal. If the ring has no bars, put the holes on the outer ring. You can add a maximum of 16 mounting holes.
Set the manufacturing rules
The manufacturing rules apply to the frame and the lettering. Only Mounting hole clearance also applies to artwork.
-
Keep the lettering joined to the frame: the frame and the lettering must be one piece of metal.
-
Minimum metal width: the narrowest part of the metal that you can cut.
-
Minimum gap: the narrowest space between two parts of the metal.
-
Mounting hole clearance: the smallest distance from a mounting hole to the lettering or artwork.
On the Text fields page, a rule problem shows as a warning. It does not stop Save. On the storefront, the customer cannot add a design that breaks a rule to the cart. The customiser tells the customer what to change.
What the customer sees
-
The customer types the wording into each line.
-
A ring shows a Diameter step with your preset sizes and a Custom size. The sizes come from the Sizes page.
-
If an area lets the customer replace the artwork, a Your artwork step shows.
-
The price comes from the diameter. The wording and the artwork do not change the price.
-
The Panel step and the Backlight step do not show. The panel colour step and the mounting step show.
Related: Set up metal cut-out signs: Set up metal cut-out signs
Remove text fields
On the Text fields page, select Remove text fields. The customiser goes back to free text.